| Price | RM56.00 - RM76.00 |
| Product SKU | 7L Jotaplast Max |
| Brand | Jotun |
| Size (L x W x H) | 28 cm x 28 cm x 24 cm |
| Availability | In Stock |
|
Colour
|
|
| Quantity |
|
**Due to weight and size restriction max 2 pail per order only or split order if more then 2 pail, thank you!**
**This products is not entitle for Free Delivery, please select shipping option accordingly.
Jotaplast Max is a quality interior acrylic emulsion paint for your walls and ceilings. It is easy to apply, provides good hiding with consistent results and reliability. Jotaplast Max is 100% free from harmful chemicals such as APEO, formaldehyde and heavy metals.
| Product type: | Interior Paints |
| Area of use: | Wall, Ceiling |
- Good Hiding
- Easy to Apply
- Wide Coverage
- Smooth Finish
- Environmentally-friendly
*This product is Singapore Green Label certified.
Features and benefits
Good Hiding - Provides good hiding power to conceal wall imperfections.
Easy to Apply - Effortless application with smooth finish. Wide Coverage - Covers wider surface area with less paint.
Formulated without Harmful Chemicals - Free from harmful chemicals such as APEO, formaldehyde, heavy metals and has low volatile organic compound (VOC).
Recommended use
For interior application, suitable for new buildings and repainting.
Substrate On concrete, masonry, plaster, brick work and soft board surfaces
Dilution The paint is ready to use after proper stirring. If thinning is required, water may be added up to a maximum of 10%.
Conditions during application The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying.
Drying times
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly. The figures given in the table are typical with: Good ventilation (Outdoor exposure or free circulation of air) Typical film thickness One coat on top of inert substrate The given data must be considered as guidelines only. The actual drying time and time before recoating may be shorter or longer, depending on the ambient temperature, film thickness, ventilation, humidity, underlying paint system, requirement for early handling and mechanical strength etc.
1. Recommended data given is, for recoating with the same generic type of paint.
2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the total thickness of previous coats applied.
3. The surface should be dry and free from any contamination prior to application of the subsequent coat.